Opening your Pool

Drain off any accumulated water on the cover away from your pool. Once removed, clean with BioGuard Stow-Away®​ to prevent sticking and odors. Store in a dry place, free of debris and protected from the sun and weather.

Your pool should be filled to the middle of the skimmer opening to allow for proper circulation.

After your circulation is running, add Pool Complete® 911.

Be sure to circulate pool water 24 to 48 hours before taking a water sample. Use a clean plastic container, provided by your BioGuard Dealer, to scoop from elbow-depth (away from skimmers and returns) about one quart of water. Seal the container and take it to your BioGuard Dealer for testing and analysis.

BioGuard pioneered the idea of computerized water analysis. Over the past 25 years, we have used our resources to research, develop and refine the science of water analysis. Today ALEX, our computerized water analysis system, provides accurate results almost instantly. You will receive personalized instructions for starting your pool with step-by-step instructions.

You can test sanitizer and pH yourself using the BioGuard 1200V Test Kit or BioGuard Test Strips to check free chlorine, total bromine residuals and pH levels and Total Alkalinity. Use the following chart to determine proper levels.

Free Chlorine residual:​ 1.0 to 4.0 ppm

Total Bromine residual:​ 1.0 to 4.0 ppm

pH:​ 7.4 to 7.6 is ideal range (7.2-7.6 is acceptable)

Total Alkalinity:​ 125 to 150 ppm (or 80 to 150 ppm for saltwater pools)

Calcium Hardness (plaster and SoftSwim® pools):​ 200 to 275 ppm

Calcium Hardness (all other types):​ 175 to 225 ppm

Routine maintenance is the best way to maintain your pool. And with BioGuard’s easy-to-use BioGuard 3-Step Care System, it’s as easy as 1-2-3! We even have a non-chlorine system, SoftSwim®, and our premium salt-based Mineral Springs®​ system. We have you covered!